Intended Use
The system is only determined for web guiding. It permits guiding according to the web edges, web center-line, printed lines, contrast edges or print features.
The system is integrated in a machine or connected with another machine to form a machine as defined by machinery directive 2006/42/EC. All machines and the overall machine line must meet the requirements of the machinery directive after integration of the system.
The system and all of its components are exclusively intended for commercial use in an industrial environment.
Moreover, the system may only be started up, if the following regulations are adhered to:
- The product must only be installed or operated in a non-explosive atmosphere.
- The product and all components may only be used while in perfect condition.
- All safety devices must be in perfect condition.
- The product may only be operated with the components belonging to the system. The only third-party components exempt from the above are those supplied by BST or explicitly approved for use with the system.
- Parts that are not in perfect condition must immediately be replaced with original spare parts.
- All work on or with the product may only be performed by instructed and qualified personnel, see chapter Qualification of the Personnel.
- Always adhere to this operating manual and all safety instructions.
- The operating conditions and performance limits indicated in the technical data must be observed.
