Selecting the Guiding Mode

You can select between the following guiding modes.

 

Guiding to the left web edge (Sensor 1)

  • »An edge sensor or a CCD camera is connected to the controller as sensor 1.
  • ▶

    Press the Sensor 1 key.

  • The LED of the key will illuminate.

 

Guiding to the right web edge (Sensor 2)

  • »An edge sensor or a CCD camera is connected to the controller as sensor 2.
  • ▶

    Press the Sensor 2 key.

  • The LED of the key will illuminate.

 

Web center-line guiding (Sensor 1 and Sensor 2)

  • »Two edge sensors or one or two CCD cameras are connected to the controller.
  • ▶

    Press the Sensor 1 and Sensor 2 keys at the same time.

  • The LEDs of both keys will illuminate.

 

Line / contrast / feature guiding (Sensor 3)

  • »A CLS Pro 600 line and contrast sensor or a CLS CAM 100 object sensor is connected to the controller as Sensor 3.
  • ▶

    Press the Sensor 3 key.

  • The LED of the key will illuminate.