1. Operating Manual
2. Design and Function
3. Special Guiding and Monitoring Functions
4. Line Width Measurement

Line Width Measurement

The line width measurement enables a continuous monitoring of the width of a printed line during the production process. In doing so, the line is scanned by a BST CLS Pro 600 line and contrast sensor or a CLS CAM 100 object sensor.

The function continuously measures the width of the printed line and compares the calculated value to the preset target width. The line width measured is shown in the display of the control panel. If the line width measured is less or more than the warning or error limit set by the operator, it is displayed. The controller provides digital message outputs for the warning and error limits.

For a detailed description of this function, see chapter Line Width Measurement.