2. Operation
3. Selecting the Operating Mode
4. Automatic

Automatic

In this operating mode, automatic web guiding is carried out depending on the guiding mode selected (guiding to the left or right web edge, web center-line guiding, line or contrast guiding).

WARNING

Danger of death from actuator movements!

Parts of your body could be crushed, cut or hit.

• ▶Make sure that no persons remain in the vicinity of the pivot / traversing area of machine components that are positioned by the actuator.

• The desired guiding mode is selected (see Selecting the Guiding Mode).

• ▶Press the Automatic key.

• The LED of the key will illuminate.

• The controller switches to automatic mode.