1. Installation and Commissioning Manual
2. Remote Control (Digital Inputs / Outputs)
3. Digital Inputs / Outputs
4. Digital Inputs

Digital Inputs

The digital inputs of the controller permit a remote control of the functions via an external switch or using PLC signals.

Signals that are located on the remote control inputs of the controller block the keys on the control panel with counter functions.

If a remote control signal (+24 V⎓) is activated at the respective terminals of the controller, the assigned LED H1 to H12 lights up on the processor board of the controller (see Status Display of Remote Control Inputs). The corresponding function can no longer be switched via the control panel!