X70 - Power Supply
The power supply is connected to the controller using a 3-pin plug according to CEN 175301-803, DIN 43650 (3 x 0.75 mm2, cable diameter 4.5 mm to 6 mm).
Rotate the smartphone by 90 degrees to show the entire table.
Contact | Signal | Wire Colour | Comments |
|---|---|---|---|
1 | +24 V⎓ | brown | Leads internally to terminal strip X6 |
2 | GND | white | |
| Equipotential bonding | green | Connected to the enclosure |
The contact marked by the symbol 
is only used for establishing the equipotential bonding (working earth). The contact is not a connection for protective earth. This unit does not require protective earthing.
is only used for establishing the equipotential bonding (working earth). The contact is not a connection for protective earth. This unit does not require protective earthing.