Fastening Possibilities
NOTICE
Damage to the product or the production machine from insufficient fastening!
Parts falling down may damage the production machine.
- ▶Have the assembly carried out only by BST service personnel or authorized personnel.
- ▶Use only fastening screws according to the specification (see enclosed installation drawing).
- ▶Check the tight fit of the fastening screws at regular intervals.
For the fastening of the sensor positioner to the machine frame, you can use either the fixing boreholes on the left and the right side of the housing, or the threaded holes on the underside of the housing. The hole distances for the fastening possibilities can be obtained from the overview drawings in the Appendix of this document.
