Fixing Boreholes on the Left and Right Side of the Housing
On both sides of the housing (side A and B), there are three fixing boreholes (Ø 9 mm) each on the back side and underside of the housing.
The fastening of the sensor positioner on the machine frame is carried out using either the fixing boreholes on the rear or the underside of the housing.
- We recommend using the outer fixing boreholes for the fastening.
- For reinforcement, place both supplied underlay plates on the rear or bottom housing plate.
- Fix the housing to both sides using two M8 screws (strength class, at least 8.8).
