Selection of Parameter Set For The Guiding Setpoint
The selection of parameter sets (1 to 4) is carried out via a digital input signal at terminals 22 and 23 of the controller.
Prerequisite
Function table 1 (Table 1) or 4 (Table 4) for allocation of the digital inputs and outputs is active (see Selection of Function Table).
Terminal assignment
Rotate the smartphone by 90 degrees to show the entire table.
|
Terminal |
Parameter set | |||
|---|---|---|---|---|
|
1 |
2 |
3 |
4 | |
|
22 |
0 |
1 |
0 |
1 |
|
23 |
0 |
0 |
1 |
1 |
1 = high (+24 V⎓)
0 = low (0 V⎓ (GND) or terminal open)
