CCD Camera Calibration
The CCD cameras connected are calibrated either by means of the ekr CON 600, ekr CON 600 net controller or directly on the CCD camera depending on the camera type and operating mode (see table).
Rotate the smartphone by 90 degrees to show the entire table.
Camera type | Operating mode | DIL switch | Calibration | |
|---|---|---|---|---|
S1.1 | S1.2 | |||
CCDPro 5000/30000 | — | — | — | Calibration is carried out by means of the ekr CON 600, ekr CON 600 net controller* |
CCD CAM 100 | CCDPro 5000 | ON | OFF | |
CCDPro 30000 | OFF | ON | ||
CCD CAM 100 | OFF | OFF | Calibration is carried out on the CCD CAM 100 camera Procedure see installation and operating manual CCD CAM 100, document number MD.465 | |
* Function is no longer available from firmware version 1.9.16 of the ekr commander control panel!
